PLAYGROUND 1000X600X340 cm

By using a barrier, the complex is divided into two parts, for children and toddlers. The entrance to the toddlers’ side is a staircase leading to a square platform, while on the right a plastic tunnel is placed that leads to a triangular platform. From the triangular platform, the exit from the complex is made with a stainless steel slide.
The children’s side begins with a climber’s climb that leads to an adjustable triangular platform and from there to an inclined bridge. The bridge leads to another triangular platform that is connected to a diamond-shaped platform. The curved ramp with handrails ends at this platform. On the opposite side, another triangular platform is placed to which the curved ramp is connected, while the bridge with ropes is placed next to it. This ends in a trapezoidal platform to which a second stainless steel slide and a curved rope ramp are attached

The playground composition consists of:
Square platform. The platform consists of 4 glued wooden columns with a cross section of 10 x 10 cm, 1 platform consisting of a square frame with wooden beams with a cross section of 10 x 10 cm and a marine plywood with anti-slip flooring. Barriers are attached to the free sides of the loft to protect against falls made of marine plywood or wooden railings made of beams measuring 9.5 x 3.5 cm.
Triangular platform. The platform consists of, 3 wooden glued columns with a cross section of 10 x 10 cm., 1 platform consisting of a triangular frame with wooden beams with a cross section of 10 x 10 cm. and a marine plywood with a non-slip floor. On the free sides of the loft, barriers are fitted to protect against falls made of marine plywood or wooden railings made of beams with dimensions
9.5 x 3.5 cm.
Adjustable triangular platforms. Each platform consists of, 1 wooden glued column with a cross section of 10 x 10 cm.,
1 platform consisting of a triangular frame with wooden beams with a cross section of 10 x 10 cm. and a marine plywood with a non-slip floor. On the free sides of the loft, barriers are fitted to protect against falls made of marine plywood or wooden railings made of beams measuring 9.5 x 3.5 cm.
Trapezoidal platform. The platform consists of 5 glued wooden columns with a cross section of 10 x 10 cm., 1 platform consisting of a trapezoidal frame with wooden beams with a cross section of 10 x 10 cm. and a marine plywood with anti-slip floor. On the free sides of the loft, barriers are fitted to protect against falls made of marine plywood or wooden railings made of beams measuring 9.5 x 3.5 cm.
Rhombus-shaped platform. The platform consists of 6 glued wooden columns with a cross section of 10 x 10 cm, 1 platform consisting of a diamond-shaped frame with wooden beams with a cross section of 10 X 10 cm and a marine plywood with a non-slip floor. On the free sides of the loft, barriers are fitted to protect against falls made of marine plywood or wooden railings made of beams measuring 9.5 x 3.5 cm.
Stainless steel slides. Each slide is straight without changes in course or inclination along its length. The rolling surface is made of 1.5 mm thick stainless steel sheet without sharp edges or corners. On either side of the rolling surface and along it, sides made of marine plywood are placed. The user’s entrance area has side protection made of marine plywood in the form of animals and a protective crossbar made of Φ26 mm iron pipe.
Ascending ladder. The ladder consists of, 2 glued wooden columns with a cross section of 10 x 10 cm, 2 side step carriers made of wooden beams with a cross section of 13 x 4.5 with reinforcement from a 2 x 3 cm iron beam, 4 steps made of wooden beams with a cross section of 13 x 4.5 cm, 4 handrails made of wooden beams with a cross section of 9.5 x 4.5 cm. The ladder is attached to one of the free sides of the platform. The steps are equidistant from each other and are stabilized horizontally. A protective surface is placed on the back of the steps to prevent trapping. The handrails also function as protective bars to prevent falls.
Curved ramp. The ramp consists of, 1 curved frame made of iron beams with a cross-section of 6 x 4 cm, 12 wooden beams with a cross-section of 9.5 x 3.5 cm, 1 multi-strand wire rope coated with polypropylene with a diameter of Φ16 mm. The curved ramp is attached to one of the free sides of the platform. At the entrance to the platform, a transverse protective bar made of iron pipe with a diameter of Φ26 mm is placed, on which the rope is attached.
Curved ramp with ropes. The ramp consists of, 1 curved frame made of iron pipes with a diameter of Φ46 mm. with rope holders, 1 mesh of multi-strand wire ropes coated with polypropylene, diameter Φ16 mm. The curved ramp with ropes is attached to one of the free sides of the platform. At the entrance to the platform they place auxiliary metal handrails.
Curved ramp with handrails. The ramp consists of, 1 curved steel beam with a cross-section of 8 x 4 cm, 6 polypropylene handrails. The curved ramp with handrails is attached to one of the free sides of the platform. Auxiliary metal handrails are placed at the entrance to the platform.
Rope bridge. The rope bridge consists of, 1 glued laminated timber floor with a cross-section of 20 x 10 cm, 2 glued laminated timber handrails with a cross-section of 9.5 x 4.5 cm. Ropes made of multi-strand wire rope coated with polypropylene fibers which start from one handrail, circle the floor and end at the second handrail.
Inclined bridge. The inclined bridge consists of, 1 rectangular corridor of hollow beams 6 x 4 cm. and treads of wooden beams 9.5 x 3.5 cm., 2 rectangular frames of hollow beams 32 x 20 mm. on which the railings of wooden beams 9.5 x 3.5 cm. are attached, 2 handrails of iron pipe Φ42 mm. The curved bridge is attached to one of the free sides of the platforms.
Plastic tunnel. The plastic tunnel consists of a double-walled structured tube which is attached to the free sides of the platform using marine plywood barriers. It is made of high-density polyethylene and is corrugated on the outside and smooth on the inside.
Climbing a climber. The climber’s climbing is made of a marine plywood panel that has gypsum grips on its surface for climbing. Auxiliary metal handrails are placed at the entrance to the platform.
Decorative canopies. The six pillars of the platforms are elevated and have a decorative HPL canopy on their top.
The playground composition is marked with the information required by the EN 1176:2017/1,3 standard. It is accompanied by all the necessary documents for its installation and maintenance (drawings with the dimensions of the structure as well as the free space required around the perimeter, installation instructions, foundation instructions and maintenance instructions).

Prices and Shipping Costs

1. The prices listed on the product pages are in Euros and include the legal VAT and other components of the price.
2. Besides the listed prices, our company charges for delivery within Greece a shipping fee of 5.00 € for orders up to 149.99 € (not applicable for inaccessible areas). For online orders over 150.00 €, shipping is free (not applicable for inaccessible areas requiring transshipment).
   • For orders over 150 €:
     • If it is an inaccessible area: the customer is responsible for picking up the goods from the transport company’s offices or arranging delivery to their location at an additional charge, with prior telephone notification.
     • In case of additional shipping costs due to large order volume, you will be informed via phone or electronic correspondence about the extra cost.
   • For orders under 150 €:
     • With courier: A charge of 5.00 € plus a cash on delivery fee of 4.00 €.
     • With transport company: A charge of 10.00 €. If transshipment to the delivery address is required, you will be informed by phone about the transportation cost.
     • In case of additional shipping costs due to large order volume, you will be informed via phone or electronic correspondence about the extra cost.
3. For cash on delivery payments, the customer is charged an additional fee of 4.00 euros, collected on the spot by the deliverer. If there are other taxes or expenses, you will be informed by phone.

Delivery

1) Delivery is carried out within the Greek territory through ACS, General Post Office, ELTA Courier Door-to-Door, or by our chosen transport company.

2) The delivery time is typically 1-5 business days. If delivery times vary, you will be notified accordingly.

3) If the ordered product cannot be delivered on time due to delayed delivery from our supplier, you will be promptly informed. In such cases, you are entitled to decide whether to wait for the product or cancel your order. In case of cancellation, any exchanges already provided will be refunded without delay.

4) Shipment to the customer is made in areas covered by the company’s distribution network (transport company).

We would like to inform you that the minimum order amount for cash on delivery payment method is set at €20 (product value).